When set fully to the CUE position, the respective channel's Cue button must be active to hear audio. Cue Mix: Adjusts the audio output to the headphones, mixing between the cue output and the.Please see the descriptions of each below. Some controllers will have other headphone output options, such as Split Cue and Cue Mix. Here is an image of what this button will look like. Most modern controllers will have a headphone icon and the button will brightly illuminate when active. To activate the headphone output, press the Cue button located above the respective deck's channel fader. The volume knob for the headphones will often times be labeled as "CUE", but sometimes are labeled as "HEADPHONE". To use headphones with your controller for cueing tracks, connect a pair of headphones to the headphone port. The booth output will typically have an individual knob to control the volume. * Note - you can also connect your speakers to your controller's "Booth" outputs if they are present on your controller. Most variations of adapters can be found online (i.e 3.5mm to RCA, 1/4" to XLR, etc.). If your speaker's available inputs do not have the same connection as your controller's outputs, you may need an adapter to complete the connection. The ports available will vary based on the controller you are using these connections will typically be XLR, 1/4", RCA, or 3.5mm (1/8") AUX. To utilize your controller's audio outputs, connect your speakers directly to the controller's main/master output. Routing Audio to your Controller's Outputs Ensure that your computer speaker's volume is up.This is the most common issue that occurs you should always be aware of the position of your knobs and faders while practicing or performing your DJ set. Here is an example of how the knobs should be set when testing for audio issues. For example, if your Filter knob is set all the way to Low or Hi, this will stop audio from coming through those channels. This will ensure that all the outputs are open without restriction. Set all knobs and faders to the middle position.Ensure your device's drivers are installed for your computer's operating system (if applicable).If you are experiencing trouble getting any audio from your device, there are a number of factors to check. From here, check the box that says "Use Laptop Speakers". Navigate to Serato's settings on the top right hand corner of the Serato screen and click the Audio tab. To use your computer's speakers on a Mac, plug your controller into your computer via USB. If this is not the first time you launch Serato DJ, click the Settings icon on the top right-hand corner and click the Audio tab. If this is your first time launching the software, you will receive the following prompt on the bottom right-hand corner. Once you have selected your internal sound card, you can now open Serato DJ. Be sure to select your computer's internal soundcard as an audio device once you connect your controller, the computer will automatically change the sound card to your controller. You can get here by right-clicking the speaker icon on the bottom right-hand corner of your screen.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |